OBDII Tracker with BLE and CAN BUS reading
The Plug & Play OBDII tracker with CAN BUS reading for tracking vehicles and providing insight vehicle data such as ignition, VIN, odometer, fuel level, etc. When working with BLE sensors it can monitor the temperature, humidity, door status, etc. It’s a vehicle tracker that requires no installation and maintenance, but offer powerful functions.
Real time location updates can be as frequent as 3s. Up to 60,000 location points can be saved in buffer if out of network coverage
No installation and maintenance needed
VIN/odometer/fuel level/RPM/DTC
6 axis accelerometer for accurately detecting reckless driving events such as harsh acceleration, turning, braking and crash.
Compatible with TOPFLYtech’s BLE temp & humi senor TSTH1-B, temp & door sensor TSDT1-B, wireless relay TSR1-B and your own sensors
Internal buzzer for waring drivers when harsh driving behaviour occurs.
Alerts for device disconnected from power
Backup power for sending disconnection alerts when power disconnected
Alerts for engine is switched on or off
Operating Band
LTE FDD Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85
LTE FDD Cat NB2: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85
GSM/EDGE 850/900/1800/1900 MHz
LTE-M Data Rate (kbps): Max. 588 (DL), Max. 1119 (UL)
NB-IoT Data Rate (kbps):
Cat NB2: Max. 127 (DL), Max. 158.5 (UL)
Cat NB1: Max. 32 (DL), Max. 70 (UL)
EDGE Data Rate (kbps): Max. 296 (DL), Max. 236.8 (UL)
GPRS Data Rate (kbps): Max. 107 (DL), Max. 85.6 (UL)
GNSS Chipset：MediaTek high gain GNSS receiver
Parallel GNSS：GPS+Glonass or GPS+Beidou
Receiver Type：33 tracking / 99 acquisitions- channel GNSS receiver
Position Accuracy (CEP)：Autonomous < 2.5m
TTFF @ -130 dBm with (without) EASY™：
Cold start: < 15s (32s)
Warm start: < 8s (28s)
Hot start: < 1s (1s)
Connector：OBDII
CAN Data Reading：Yes
Support legislated OBDII protocols：ISO 15765-4
SIM card slot：Nano SIM card slot
LTE/GNSS/Bluetooth Antenna：Internal only
Indicator LED：Network, Diagnostics and GNSS
FOTA：Yes
BLE (Bluetooth Low Energy)：5.0
USB：Debug
Buzzer: Event triggering
Dimensions：63mm*47mm*20mm (2.48” *1.85” *0.79”)
Weight：48g (1.7oz)
Backup Battery：Li-Polymer 200 mAh/ 3.7V
Operating Voltage：7V to 32V DC
Operating Temperature：-30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature：-40℃ ~ +85℃ (-40°F ~ 185°F)
Transmit Protocol：TCP, UDP, MQTT, SMS
BLE Accessory Support：Yes
Scheduled Timing/angle/distance Report：Report position and status at preset intervals
External Power Status Alarm：Report when external power is disconnected
Low Power Alarm：Report when backup battery is low
Speeding Alarm：Report when speed exceed the pre-set value
Network Signal Jamming Detection：Report network jamming
Data Roaming Control：Avoid additional data consumption
Driving Behavior Monitoring：Aggressive driving behavior detection, e.g. harsh braking and acceleration
Crash Detection：Accident data collection for reconstruction and analysis
FCC, PTCRB, CE, RCM, AT&T, US Cellular
*Verizon(pending), T-mobile (pending), Sprint (pending)