Basic Hardwired Tracker with I/Os
PioneerX 100 is an entry level hardwired tracker that has I/Os that could be used for ignition detection, relay, buzzer, SOS button, or your own accessories. When working with BLE sensors it can monitor the temperature, humidity, door status, etc. It’s an all-in-one model to serve your needs for customized solution.
Real time location updates can be as frequent as 3s. Up to 49,000 location points can be saved in buffer if out of network coverage.
4G CAT-1 network global bands with 2G fallback is supported
Compatible with TOPFLYtech’s BLE temp & humi sensor TSTH1-B, temp & door sensor TSDT1-B, wireless relay TSR1-B and your own sensors
Alerts for engine is switched on or off
Alerts for device disconnected from power
Detecting reckless driving events such as harsh acceleration, turning, braking, crash and speeding
Wide range of external power supported
Optional IP67 waterproof casing
Multiple digital I/Os, compatible with wiring relay, buzzer and siren for vehicle immobilisation for anti-theft
LTE FDD Cat 1: B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/ B20/B25/B26/B28/B66
LTE TDD Cat 1: B34/B38/B39/B40/B41
GSM:850/900/1800/1900 MHz
GNSS Chipset：HD8120
Parallel GNSS：GPS+Beidou+Galileo+QZSS（SBAS）
Receiver Type：24 tracking / 66 acquisitions- channel GNSS receiver
Position Accuracy (CEP)：Autonomous < 1.5m
Standalone TTFF：Cold start: < 20s
Warm start: < 2s
Hot start: < 2s
Digital Input (ACC): for ignition detection (input range 0-32V, 5≤: ignition on,≤2V ignition off, from 2V to 5V: unstable status)
Digital Input (SOS): Panic (SOS) button (connect to ground trigger alert)
Digital output: 2 digital outputs for relay control
Indicator LED：Network and GNSS
FOTA：Yes
BLE (Bluetooth Low Energy)：4.2
WIFI: 2.4 GHz 802.11b (Rx)
Tracker Configuring: Type C Connector
Waterproof：IP41
Dimensions: 105.7mm*57.6mm*16.8mm(4.16” *2.26” *0.66”)
Weight：55g (1.94oz)
Backup Battery：Li-Polymer 200 mAh/ 3.7V
Operating Voltage：5V to 32V DC
Operating Temperature：-30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature：-40℃ ~ +85℃ (-40°F ~ 185°F)
Transmit Protocol：TCP, UDP, MQTT, SMS
Protocol Check & Encryption Support: MD5/ AES256
BLE Accessory Support：Yes
Scheduled Timing/angle/distance Report：Report position and status at preset intervals
External Power Status Alarm：Report when external power is disconnected
Speeding Alarm：Report when speed exceed the pre-set value
Towing Alarm：From internal 6-axis accelerometer
Remote Control：Remote output control
Network Signal Jamming Detection：Report network jamming
Data Roaming Control：Avoid additional data consumption
Driving Behavior Monitoring：Aggressive driving behavior detection, e.g. harsh braking and acceleration
Crash Detection：Accident data collection for reconstruction and analysis