Hardwire Tracker with I/Os and BLE 5.0
PioneerX 101 is an entry to medium level hardwired tracker that has I/Os that could be used for ignition detection, relay, buzzer, SOS button, or other accessories. When working with BLE sensors it can monitor the temperature, humidity, door status, SOS, driver ID, etc. It’s an all-in-one model to serve your needs for customized solution.
Real time location updates can be as frequent as 3s. Up to 40,000 location points can be saved in buffer if out of network coverage.
4G CAT-1 network global bands with 2G fallback is supported
Compatible with TOPFLYtech’s TSTH1-B temp & hum sensor, TSDT1-B door sensor, TSR1-B wireless relay, T-button, T-sense and others.
Alerts for engine is switched on or off
Alerts for device disconnected from power
Detecting reckless driving events
Wide range of external power supported
IP67 waterproof rating
Multiple digital I/Os, compatible with wiring relay, buzzer and siren for vehicle immobilisation for anti-theft
Backup power for sending disconnection alerts when battery disconnected
Power, Transmit, Receive ports to connect accessories like RFID readers, cameras,
Power and data ports to connect 1-wire accessories
Project focused only
LTE FDD Cat 1:
B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/
B20/B25/B26/B28/B66
LTE TDD Cat 1:
B34/B38/B39/B40/B41
GSM (2G):
850/900/1800/1900 MHz
GNSS Chipset：All-In-One GNSS receiver
Parallel GNSS：GPS+Beidou+Galileo+QZSS（SBAS）
Receiver Type：24 tracking / 66 acquisitions- channel GNSS receiver
Position Accuracy (CEP)：Autonomous < 1.5m
Standalone TTFF：Cold start: < 20s
Warm start: < 2s
Hot start: < 2s
I/Os: depending on version
Indicator LED：Network and GNSS
FOTA：Yes
BLE (Bluetooth Low Energy)：5.0
WIFI: 2.4 GHz 802.11b (Rx)
Tracker Configuring: Type C Connector
Dimensions: 102.6 x 42.6 x 13.0 mm (4.04” x 1.67” x 0.51”)
Weight：50g (2.47oz)
Operating Voltage: 7~100V DC
Internal memory: 8MG
Operating Temperature：-30℃ ~ +80℃ (-22°F ~ 176°F)
Storage Temperature：-40℃ ~ +85℃ (-40°F ~ 185°F)
Transmit Protocol：TCP, UDP, MQTT, SMS
Protocol Check & Encryption Support: MD5/ AES256
BLE Accessory Support：Yes
Scheduled Timing/angle/distance Report：Report position and status at preset intervals
External Power Status Alarm：Report when external power is disconnected
Speeding Alarm：Report when speed exceed the pre-set value
Towing Alarm：From internal 6-axis accelerometer
Remote Control：Remote output control
Network Signal Jamming Detection：Report network jamming
Data Roaming Control：Avoid additional data consumption
Driving Behavior Monitoring：Aggressive driving behavior detection, e.g. harsh braking and acceleration
Crash Detection：Accident data collection for reconstruction and analysis