TLP1-LF (4G LTE)
Long Life Battery Asset Tracker
When frequent location update is not required for stationary asset, TLP1-LF is the one you go with. 1-4 updates per day will keep the battery at a healthy consuming rate for long term tracking.
Features
Fixed reporting interval
Regular location updates to reduce power consumption
Rugged construction
Thick and solid casing and rugged construction for outdoor uses
Long life battery
non-rechargeable 8100 mAh/3.6V battery, can be replaced from us at a small cost
IP67 waterproof
Tested in 5-meter water pressure environment for 15 hrs
Removal alerts
Alerts sent when device is pulled off from asset
Easy installation
It can be mounted with magnets, screws, polyurethane or heavy-duty tape by end users
Technical Specifications
Operating Band：FDD: B1/B2/B3/B4/B5/B8/B12/B13/B19/B20/B25/B28
TDD: B39 (Cat M1 only)
EGPRS 850/900/1800/1900MHz
1 report per day: 5 years
GNSS Chipset：Qualcomm Gen 8C GNSS receiver
Parallel GNSS：GPS+Glonass+Galileo+Beidou
Position Accuracy (CEP)：Autonomous < 2m
Standalone TTFF：Cold start: < 29s
Warm start: < 27s
Hot start: < 1s
Data Transmission：4 Pin port with magnet
Network, GNSS Antenna：Internal only
Indicator LED：Network, GNSS and Battery level
FOTA：Yes
Physical Power Switch：1
Light Sensor：1 back light sensor
Temperature Sensor：1 temperature sensor
Waterproof：IP67
Dimensions：69.3mm*143mm*24.8mm (2.73” *5.63” *0.98”)
Weight：210g (7.4oz)
Battery：Non rechargeable 8100 mAh/3.6 V Li battery
Data Communication：Magnetic USB cable
Operating Temperature：-20℃ ~ +80℃ (-4°F ~ 176°F)
Mounting：Magnet/Screw
Transmit Protocol：TCP, UDP, MQTT, SMS
Geo-fence：Support up to 64 internal geo-fence regions
Low Power Alarm：Sending alarm when battery is low
Motion Detection：Motion alarm based on internal 3-axis accelerometer
Removal Alarm：Sending alarm when the light sensor detecting the light changing
FCC, PTCRB, CE, RCM, AT&T, US Cellular
